小乐 发表于 2021-12-03
CONN PH TO /1205-N5
(Where /1205-N5 is a Nozzle) The Head attributes of the current element (Branch or Hanger) are set to match the position, orientation, bore and connection type of the Nozzle (see Figure 3:1.: Connecting a Branch Head or Tail).
CONN PT TO LAST MEM The Tail attributes of the current element will be set to match the Leave Point of the last Component (that is not an Attachment point).
CONN PT TO /100-A8/T2
(Where /100-A8/T2 is a TEE) The Tail attributes of the current element will be set to match the free p-point on the specified TEE (see Figure 3:1.: Connecting a Branch Head or Tail).
CONN PT TO P4 OF /VF205
(Where /VF205 is a VFWA.) The Tail attributes of the current element will be set to match the specified p-point.
CONN PH TO PT OF /100-A8/1 (Where /100-A8/1 is another Branch) The Head attributes of the current element will be set to match the Tail of the specified Branch.
CONN PH TO ID NOZZ@ As in the first example, but with the Nozzle identified by cursor selection.
(Where /1205-N5 is a Nozzle) The Head attributes of the current element (Branch or Hanger) are set to match the position, orientation, bore and connection type of the Nozzle (see Figure 3:1.: Connecting a Branch Head or Tail).
CONN PT TO LAST MEM The Tail attributes of the current element will be set to match the Leave Point of the last Component (that is not an Attachment point).
CONN PT TO /100-A8/T2
(Where /100-A8/T2 is a TEE) The Tail attributes of the current element will be set to match the free p-point on the specified TEE (see Figure 3:1.: Connecting a Branch Head or Tail).
CONN PT TO P4 OF /VF205
(Where /VF205 is a VFWA.) The Tail attributes of the current element will be set to match the specified p-point.
CONN PH TO PT OF /100-A8/1 (Where /100-A8/1 is another Branch) The Head attributes of the current element will be set to match the Tail of the specified Branch.
CONN PH TO ID NOZZ@ As in the first example, but with the Nozzle identified by cursor selection.
上一篇：PDMS 删除某目录下所有子元素
下一篇：PDMS 钢结构延长命令